top of page

Portable Rocket Firebox Building Workshop my Massachusetts Studio 
January 8-10, 2027.

IMG_7268_edited.jpg
IMG_7223.jpeg
IMG_4913.jpeg
IMG_9156_edited.jpg

In this unique hands-on workshop, students will build their own portable rocket kiln firebox that can be easily moved, quickly assembled, fired, disassembled and carried in for storage! Under the guidance of Lisa Orr and master rocket builder Rodney Morgan, each participant will cut, shape and fasten together their own materials in order to to create their own firebox that can be combined with their own kiln body to have their own portable rocket kiln that can be fired with dry untreated pallets.

​

This portable firebox is divided into three parts each weighing less than 30 pounds, which can be stacked up for firing in less than 5 minutes. It can fire any temperature up to cone 10 in just a few hours. The fireboxes are made of precisely cut soft brick wrapped in a stainless steel jacket. Additionally, we will be making a damper assembly to go on the lid of the kiln. Please read as much info as you can about the unique design of the rocket kiln and fire box before signing up! The main utility of THIS portable firebox is that you can store it away, set it up and fire in your driveway or yard, and take it down when done.  It is a smokeless, off-grid way to fire with scrap pallets.

 

After everyone completes their own firebox, students will be instructed on how to modify their own up-cycled electric kiln body at home. Participants shall locate their own kiln shell, metal-insulated chimney, portable adjustable sawhorse, and Kindling Cracker (or other portable wood splitter) to complete their set up after the workshop. The ideal size of firing chamber for this setup is an 8-sided body that is 18"-27" deep (818 or 827)  OR two rings of 10-sided body with a 23" inside diameter (1018).

​

During this workshop students should expect to cut firebrick, softbrick, and sheet metal with the provided tools. Students will need to bring adequate work gloves and respirator, eye protection and any other necessary PPE. Students will be using a variety of hand and power metal cutting and bending tools, several kind of saws, sanders, etc with the help of the instructors. Everyone will be guided on how to safely and correctly utilize these.

​

We will also fire an existing rocket kiln for practice!

​​

DATES:

January 8-10, 2027

ARRIVAL: 9am Friday January 8, 2027

DEPARTURE: 6pm Sunday January 10, 2027

​

WORKSHOP COST:  $850​

OPTIONAL MATERIALS FEE ​(AT COST): $845 or Bring Your Own!


9 Split firebricks (9''x4''x1.5") $4x9= $36
50 Softbricks (G28 9x4x 3")  $12x50= $600
2 Pieces of Stainless Steel Sheet Metal (22 gauge 48"x24" SS 304 or 302) $130
200 sheet metal screws = $10
Banding Material (35 ft + 16 fasteners) = $25
18 Corner Guard metal case protectors= $45

 

BRING THESE IF YOU HAVE THEM:
Kaowool  10x10" piece approximately

6x8" piece of kiln shelf to perforate, I can provide if you don't have one

​​​​

LOCATION: Lisa Orr Pottery Studio in Northborough, MA

WHAT TO BRING: ear protection, gloves, eye protection, respirator, tape measure, warm work clothing suitable for some outdoor activity. If you can bring at least one piece of broken kilnshelf at least 6x8" and a small bit of kaowool for your build that would be appreciated. 

FOOD: Snacks and beverages will be provided. Please bring your own lunch, or stop by the deli at the nearby farmer's market!
PRICE: $850 + $845 optional materials fee

Full refund up to two weeks prior to the start of the event. 

​​​​

​

​​

 

 

 

​

© 2026 by Lisa Orr

bottom of page